Brief Introduction:
photosensitive adhesive glue is a class after irradiation by UV-curing adhesive. With the traditional thermal-curing adhesive are different type of adhesive at room temperature, variable-rays after a short time (seconds to tens of seconds) cured completely, and the cured strength, high transparency, very suitable for bonding transparent yoga materials and printed circuit boards, potting, encapsulation and so on impact glass products. In addition, since light-curing adhesive formulations do not contain volatile substances, formulations react with the curing ingredients are, therefore, environmental pollution, and because the curing time is short, suitable for autoyoga mated production.
this project series of photosensitive adhesive, Z951 type adhesive for bonding glass, such photosensitive rubber prices are low, the high bond strength of glass, heat and temperature heat is good, and can be applied to potting the circuit board .
Z961 for bonding a transparent plastic light plastic, its price is higher than the Z951, but for PC, PS, PMMA and other plastics bonding firm, and good toughness, now promote the use of a small scale.
Z971 for potting impact glass and plastic glue, transparent type of plastic is good, and the toughness of high, is currently being perfected.
performance indicators:
Z951 adhesive strength 6MPa, by cooking in boiling water and cold water alternately, the intensity of 3 ~ 4MPa.
Features:
with the heat-curing adhesive than the non-polluting, fast curing, energy saving, high efficiency and low investment required to set exposure when the curing box.
Scope:
Z951 suitable for bonding glass, glass and metal, glass and plastic; Z961 is suitable for bonding all kinds of transparent plastic; Z971 impact glass is suitable for potting.
promote the use of:
currently under some plastic products and impact glass trial.
production of the necessary equipment:
exposure case, the reaction kettle.
Cooperation:
transfer of technology.
luckyxie2
欢迎您来我的凤凰博客！
